background image

SoundStation2W™ Administrator Guide - 40

This device complies with part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions:

(1) This device may not cause harmful 

interference, and

(2) This device must accept any inter-

ference received, including interfer-
ence that may cause undesired 
operation.

NOTE: This equipment has been tested 
and found to comply with the limits for 
a Class B digital device, pursuant to 
part 15 of the FCC Rules.  These limits 
are designed to provide reasonable 
protection against harmful interference in 
a residential installation. This equipment 
generates, uses and can radiate radio 
frequency energy and, if not installed and 
used in accordance with the instructions, 
may cause harmful interference to radio 
communications.  However, there is 
no guarantee that interference will not 

occur in a particular installation.  If this 
equipment does cause harmful interference 
to radio or television reception, which can 
be determined by turning the equipment 
off and on, the user is encouraged to try to 
correct the interference by one or more of 
the following measures:

 Reorient or relocate the receiving 

antenna.

 Increase the separation between the 

equipment and receiver.

 Connect the equipment into an outlet 

on a circuit different from that to 
which the receiver is connected.

 Consult the dealer or an experienced 

radio/TV technician for help.

In accordance with part 15 of the FCC 
rules, the user is cautioned that any 
changes or modifications not expressly 
approved by Polycom Inc. could void the 
user’s authority to operate the equipment.

This Class [B] digital apparatus complies 
with Canadian ICES-003.

Cet appareil numérique de la classe [B] 
est conforme à la norme N M B-003 du 
Canada.

FCC Rules

Canadian Department of Communications Notice

US Telephone Company Requirements

This equipment complies with part 68 
of the FCC Rules.  Please refer to the 
labeling on equipment for the following 
information:

 Registration Number

 Ringer Equivalence

 Grantee’s Name

 Model Number

 Serial Number and/or Date of Manu-

facture

 Country of Origin

If requested, this information must be 
provided to the telephone company.

Notes:

 This registered equipment may not be 

used with party lines or coin lines.

 If trouble is experienced, the cus-

tomer shall disconnect the registered 
equipment from the telephone line to 
determine if the registered equip-

ment is malfunctioning and that if the 
registered equipment is malfunction-
ing, the use of such equipment shall 
be discontinued until the problem has 
been corrected.

 If, in the unlikely event that this 

Summary of Contents for SoundStation 2W















































Reviews: