KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8
8
6. Press
√
to confirm the ID number.
7. Press
√
to confirm the AC Code and the system number (Each handset can be subscribed to 4
different systems). The display will show “
SUBSCRIPTION WAIT “
while the handset logs
itself on to the system. A long tone indicates that the subscription has succeeded.
8. In the left corner of the display an antenna symbol will appear indicating that the
handset has been subscribed to the KIRK Wireless Server 500.
4.3 Entering the Extension Number
To allocate an extension number to the handset:
1.
Press the
MENU
key.
2.
Press the
>
key until “
EXT. Service ”
appears in the display
.
3.
Press
√
. The menu will now show
” CLIP-Stack ”.
4.
Press
<
key until
”Read/Write user data
” appears in the display.
5.
Press
√
. The Serial Number of the
MASTER
Handset will now appear in the display.
6.
Press
√
.
Enter the extension number of the user of the handset.
7.
Press
√
.
8.
Press the
MENU
key to return to standby mode.
Right after this, the handset has to be turned off (by pressing and holding down the
√
key) and
then on again. The extension number appears in the display.
The first subscribed Handset is the
MASTER
Handset, i.e. you are now able to configure further
handsets to the system via this handset.
4.4 Registration of Additional Handsets via the Master Handset
To register additional handsets
via
the
MASTER Handset
, the
MASTER
Handset
has to ”allow
subscription” for each handset by registration of the serial number(s) of the new handset(s) on
the system.
The MASTER Handset:
1.
Press the
MENU
key.
2.
Press the
>
key until
” EXT. Service ”
appears in the display
.
