Parameter Reference Guide
Polycom, Inc.
90
CallTransferEnable
Enables Call Transfer. Call Transfer, if
enabled, is initiated by the user by
hanging up the phone in one of the
following scenarios:
•
One call on hold while a second
outgoing call ringing (Case 1)
•
One call on hold while a second
outgoing call connected (Case 2)
•
One call connected while a second
outgoing call ringing (Case 3)
•
3-way conference with both calls
connected (Case 4)
If Call Transfer is disabled, hanging up the
phone in the above scenarios ends all the
calls except for the one that is holding,
which remains on hold (Cases 1 and 2).
Yes
ConferenceCallEnable
Enables 3-way Conference Call w/ local
audio mixing. Conference Call, if enabled,
is initiated by the user by hook flashing the
phone in one of the following scenarios:
•
One call on hold while a second
outgoing call ringing (Case 1)
•
One call on hold while a second
outgoing call connected (Case 2)
Case 1 is an early conference, where the
second conferencee is still ringing. The
other two parties may converse while
hearing ringback tone in the back-ground
until the third party answers. In either
case, the user can end the call with the
second conferencee by hook flashing
another time and the call reverts to a
2-way call.
If Conference Call service is disabled,
then hook flashing the phone resumes the
holding call but ends the second outgoing
call in Case 1, and swaps between the two
calls in Case 2 (as in a call waiting
situation).
Yes
Phone Port Parameter Guide
Parameter
Description
Default Setting
