Parameter Reference Guide
Polycom, Inc.
89
CallWaitingCallerIDEnable
Enables Call Waiting Caller ID (CWCID)
Signal generation.
The CWCID signal is sent to the phone
when it is in the off hook state. It starts
with a handshake between the device and
the attached phone, by exchanging
audible short tones. The device proceeds
with the transmission of the remaining
Caller ID signal only if the handshake
succeeds (with a phone is capable of
displaying CWCID). In that case the
phone mutes the handset earpiece until
the CWCID signal is complete. Some
users however may still find the audible
handshake tones objectionable, especially
if their phones do not support CWCID. Set
this option to No if you don’t want the
CWCID feature, or don’t have phones that
can display CWCID.
Yes
MWIEnable
Enables MWI Signal (stutter dial tone)
generation. If enabled, any SP voice
service enabled on the device that has
MWI Service enabled triggers the
generation of stutter dial tone if there are
new voicemails for the subscriber on the
service provider’s voicemail system.
Yes
VMWIEnable
Enables VMWI Signal generation. If
enabled, any SP voice service enabled on
the device that has VMWI Service
enabled triggers the generation of VMWI
signal if there are new voicemails for the
subscriber on the service provider’s
voicemail system.
Yes
Phone Port Parameter Guide
Parameter
Description
Default Setting
