Polycom, Inc.
24
First-time Power-up
1
For first entry installation, you must insert the USB key containing the modified IP addresses in the
USB slot on the system’s back panel.
For details on how to modify IP addresses, see
First Entry Power-up and Configuration
in the
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
.
2
Turn on the power by pressing on the
ON/OFF
button located on the front panel of the
RealPresence Collaboration Server (RMX) 1800.
The parameters in the
lan.cfg
file are uploaded from the USB key to the system’s memory and applied
during the power-up sequence, which may take up to five minutes.
When the system's configuration is completed (including the Management and IP Network Services),
and if there are no system errors, the STATUS LED on the system’s front panel turns green.
3
Remove the USB key
.
RealPresence Collaboration Server (RMX) 1800 Front Panel
You can turn the system on or off, and view the system status from its front panel.
Note: Polycom software licenses
You are required to register all Polycom software licenses you have purchased when retrieving the
Activation Key. For example, Encryption and Network Separation each have different Polycom software
licenses.
No.
Name
Description
1
LAN 1 LED
Off - No network connection
Green - Network connected
Flickering green - In use
Summary of Contents for Collaboration Server (RMX) 1800
Page 6: ...Table of Content Polycom Inc 6 Korea 32...
Page 23: ...Polycom Inc 23...
