Release Notes - UC Software
Changes
Copyright © 2011 Polycom, Inc.
Page 81
48756:
Unknown Party displayed on caller ID when using a shared line and
only number is provided, no name.
48778:
VVX 1500: Motion detection is not starting after a video conference call.
48858:
BLF attendants monitoring both initiator and recipient get confused
about state when initiator and recipient use the same dialog ID
48912:
REFER transaction timeout set too high due to subscription state
expires from a NOTIFY with sipfrag on a successful blind transfer
48920:
IP7000/HDX: When placing a Video conference call with 8 legs, the UI
does not show the two last call appearances.
48959:
SoundPoint IP 430:
After upgrading to SIP 3.1.2, the time portion of
date and time cut off when using a custom Idle Display.
48985:
The phone may reboot if you receive or miss a call while looking at
information about a previously received or missed call.
49013:
DND X icon does not update next to line key when BroadWorks ACD is
enabled.
49068:
Receiving an OPTIONS message results in a spurious dialog
Notification being sent
49129:
VVX 1500: U/I not showing updates while soft keys, physical buttons do
work.
49181
: VVX 1500: When using the idle micro-browser the phones display
sometimes freezes
‟.
49201:
Receiving Update with confirmed SDP before 200 ok caused the phone
to drop the outgoing call
49233
Incoming call line key animation is shown even after ending the call at
far end when the phone is initiating conference or transfer.
49237
SoundPoint IP 601: One-way audio when changing termination mode
during call waiting when callWaiting.ring="ring" is set.
49256:
VVX 1500: If the micro-browser tries to access a URL longer than 54
characters the phone may re-boot or lock-up.
49281:
IP7000/HDX integration: When the IP7000 is used to adjust the volume
this may cause the HDX volume level to be reduced to 0.
49287:
SUBSCRIBE terminate causes BLF labels to disappear for 2~4 seconds
49323
: VVX 1500 reboots after lifting handset while in an empty call list
49402:
Race condition when you seize one SCA line and then resume a held
call on another SCA before the line seize completes
49533:
Incorrect UDP checksum in DHCP Decline message
49599:
BLF: Attendant phone does not update 1/x widget when BLF monitored
line has 1 or multiple incoming calls being ended
Summary of Contents for 1725-31402-001
Page 8: ......