Release Notes - UC Software
Changes
Copyright © 2011 Polycom, Inc.
Page 9
47827:
Voice Quality Monitor: SoundPoint IP uses incorrect units for Jitter in
SIP PUBLISH VQSession Report.
49324:
SoundStation IP 7000: When dialing 99* from the phone with an
integrated Polycom HDX,system the * is changed to a dot on the HDX.
51904:
VVX 1500 Video Interoperability: When a Polycom HDX system (Release
2.5.x and maybe other releases) is configured for SIP using UDP, it does not
make a video connection with the VVX 1500 phone.
52592:
SoundStation IP 6000: Phone fails to provision when using the
combined sip.ld file and a TFTP provisioning server that does not support the
„bulksize‟ option.
52782:
VVX 1500 Video Interoperability: Observed some video issues when
VVX 1500 phones are bridged on Polycom HDX and VSX MCUs.
55910:
SoundPoint IP 430: Phone sometimes freezes/stops while preparing to
boot up.
57838:
SoundStation IP7000: When there is a call between two SoundStation
IP 7000 phones along with a HDX system. The HDX9004 system adds a video
call to HDX9002 then it is observed there is a hold between the SoundPoint IP
7000 phones.
58177
: When an attempt to do a blind transfer from a PSTN line to an internal
extension, at times there are 3 beeps heard after pressing the “Send” soft key.
Cancelling the operations enables the call transfer.
60086:
SoundPoint IP 650: The phone will not send an Off-Hook or On-Hook
notification when it is set to Auto Answer.
60131:
SoundStation IP 5000, SoundStation IP 6000, SoundStation IP 7000:
Reassignment of the speed dial keys does not function properly.
60186:
VVX 1500/CMA/HDX Integration: Call connection bandwidth between
the HDX and VVX 1500 does not synchronize when the VVX1500 is in CMA
provisioning mode.
60255:
SoundPoint IP 650/670: A noticeable high-frequency flicker is observed
on the display when an update for BLA remote hold/resume status occurs.
60729:
Phone should not honor a BLA NOTIFY if the version number in the
message body has increased by more than 1.
60733:
Cannot establish a local conference bridge by using a speed-dial key,
BLF line key or via call lists.
60984:
The "dir.local.contacts.maxNum” parameter should not accept “0” as it
is stated in the admin guide dir.local.contacts.naxNum accepts 1 to 99 OR 1 to
9999.
61013:
VVX 1500: The “Call Rate” value can be set higher than “Max Call Rate”
value when configured using the phone Web UI.
61067:
On the Phone UI/menu, pressing the "Back" soft key in the
Authentication menu does not restore the menu title correctly.
Summary of Contents for 1725-31402-001
Page 8: ......
