EZ2015
-
COVER PKG, EZ
BILL OF MATERIALS
DESCRIPTION
ITEM CODE
QTY
ID
10' x 14' CLEAR END POLY
BM5052
2
1
16' x 26' CLEAR ROOF -24' BM
BM5068
1
2
END FRAME POLY INSTALLATION
19
REV: AE-201007
1
1
1. Lay out Wiggle Wire pieces at the base of the end frames. Unroll End Poly Sheets (BM5052) near each end frame. Center the poly in
front of the frame.
2. Using the edge of an End Poly Sheet to act as a guide, leave a surplus of 2" of material and begin installing poly and Wiggle Wire at the
base on one corner using an up and down motion to install the wire over the layer of poly into the wiggle wire base. Proceed
across to the opposite corner, skipping over the door, if present.
3. Lift the poly to the top of the end frame, tension the poly, and attach the first piece of wiggle wire over the peak of the frame.
Continuing to tension the poly, install Wiggle Wire to secure the poly to each side of the roof end.
4. Proceed to install the poly on the other end of the structure. Clip the surplus Wiggle Wire at the corners with wire cutters.
5. Trim poly around door and at perimeter, leaving a minimum of 1" extra material for future tensioning.
2
Wiggle Wire
