Roof Poly Installation - Part 1
27
AK-210302
27
Notes:
•
Pick a calm day when attempting to install the Roof Poly. On a
windy day, it's almost impossible to handle the Poly.
•
If the Poly is installed on a cool day, the material may expand as
the temperature warms causing the Poly to droop. If this
happens, it may be necessary to re-tension the Poly and adjust
the Wiggle Wire as needed at a later date.
1
2
3
1.
Lay out sections of Wiggle Wire around the perimeter of the
structure so they are handy.
2.
Unroll the Poly on the ground along the length of the structure,
being sure to leave equal overhang on both ends.
3.
Place one worker at point
A
, and one worker at
B
. It helps to
have another worker inside the structure near
C
to help move
the Poly up and over the frame sections.
