PO Box 409 • Hanover, MD 21076 • Tel (410) 761-4000 • www.polyplanar.com
- 2 -
Controls, Input and Output Cables:
The switches and gain settings are located behind a watertight plug, which
also lights up when the amplifier is on. Be sure to replace the plug when
finished with adjustments
1)
Input A Level.
This rotary control selects the input sensitivity of the
amplifier’s RCA input (#4). Often referred to as Gain Control
2)
Pilot Lamp:
(Green) Illuminates when MZ100 is operating.
3)
Equalization
: These DIP switches are used to set one of eight different
equalization settings as shown on page 5.
4)
Input A
: Stereo RCA audio input for connecting other audio devices
5)
Volume Control
: Plug for the waterproof remote volume control. When
installed, this control will turn off the MZ100 Amp when turned all the way
down.
6)
Audio System Connection
: This plug is used for hooking the MZ-100 to
an extended poly-planar audio network using an RT20 System Router
.
7)
Control Panel Connection
: This plug is used for hooking the MZ-100 to
poly-planar
displays and
control panels.
Figure 6
– Amplifier Switch and Gain settings
Left Panel View
