Poly Planar LLC 520 McCormick Dr. Glen Burnie MD. 21061 410-761-4000
www.polyplanar.com
8
Mounting:
The IXM-10 can be mounted using the included double-stick tape (make sure
to mount to a clean, dry surface), or it can screwed in place using the included
screws and case mounting tabs. The XMD-1000 should be fixed firmly to a
clean, dry surface away from any water or excess humidity.
Make sure any unused connectors have their caps firmly attached.
Trouble shooting:
1.
Only receiving channel 1:
XM is a subscription service. Make
sure your subscription is up to date and follow the activation
instructions for your XM unit.
2.
Display reads “No Antenna”:
Make sure the XM antenna is
plugged in.
3.
Display reads “No Signal”:
Adjust placement of antenna for
maximum signal strength.
4.
Display reads “No XM”:
Check connection to XMD-1000.
5.
Poor reception or drop-outs:
Adjust placement of antenna for
maximum signal strength.
6.
No Audio:
Make sure the RCA cables are routed properly as
shown in the hook-up diagrams on pages 2-5.
7.
Will not turn on
: Verify cable connections and insure 12V power
and ground are connected.
Specifications:
Operating Voltage ………………….. ……… 13.8V (10V – 16V) DC
Dimensions (approx. w/h/d) ……………….. 105mm X 40mm X 120mm
4.15 X 1.5 X 4.75 inches
Weight ……………………………………….. 15 oz (.425 Kg)
WARRANTY
Poly-Planar marine audio systems are warranted to be free of defects in materials and
workmanship for a period of two years. Warranty is subject to proper installation and
operation within published specifications. Poly-Planar will repair or replace, at its
discretion, any unit returned prepaid to its factory and determined to be defective. Poly-
Planar Inc. is not liable for consequential damages.
Poly Planar LLC 520 McCormick Dr. Glen Burnie MD. 21061 410-761-4000
www.polyplanar.com
1
IXM-10 XM Radio Interface Module
Rev 1.0
Introduction:
The IXM-10 is a custom module designed to bring XM Radio to the Poly-
Planar line of marine audio products. It requires the
XMD-1000 XM Direct
Receiver
(Sold separately)
Features:
•
Easy way to add XM radio to the audio network
•
Complete control of XM functions
•
Song/Channel/Artist data displayed on RD-44
•
Allows mounting of the XM Direct receiver away from wet areas.
[1] XMD-1000 XM Direct Receiver (Not Included)
[2] Cable to XM Direct Receiver
[3] To XM Audio Output
[4] To 12V battery source
[5] IXM-10 Interface Module
[6] To RD-44, Network Router or Network Amplifier
[7] Audio Output to AUX2 of MRD-70
[8] To MRD-70 Radio
[6]
[3]
[7]
[1]
[2]
[4]
[8]
[5]
