23
ENGLISH
• Only pour water or the water mix indicated in the “WHICH
WATER TO USE” Chapter into the tank.
• Do not aim the steam jet at toxic substances, acids, solvents,
detergents or corrosive substances.
• Do not aim the steam jet at explosive powders or liquids, hy-
drocarbons, flames and/or incandescent objects.
• Handle and remove dangerous substances according to the
indications provided by their manufacturers.
• Do not position the product near sources of heat such as fire-
places, stoves and ovens.
• Do not position the product near electromagnetic fields such
as the induction plate.
• Re-wind the cord when the appliance is not in use.
• Do not obstruct the openings and grills on the product.
• Do not attempt to use the steam jet on any part of a human or
animal's body.
• Do not direct the steam jet on clothes while they are being
worn.
• Cloths and rags and fabrics which have been subjected to a
deep steam reach very high temperatures, above 100°C. Wait
a few minutes and check that they have cooled before han-
dling them. Therefore, avoid contact with the skin if they have
just been steamed.
• Before steam treating surfaces (wood or laminate floors, car-
pets, rugs, leather and fabrics and any surfaces especially
those that are delicate or treated), consult the surface man-
ufacturer’s or the supplier/installer’s instructions and always
perform a test on a section that is out of view or on a sample.
Allow the steamed surface to dry to ensure that there is no
deterioration, change of colour or deformation and that the
surface stands up to the temperature of the steam.
