POLTI Vaporetto SMART 30_R, Instruction Manual

Page: 29 / 100

power supply of the correct voltage (6).
Completely unwind the power cable before
plugging it into the mains and before use, and
always use the appliance with the power
cable completely unwound.
1.6 Press the ON/OFF switch. The power
indicator light will come on.
1.7 Wait for the pressure indicator lamp to
light up (about 8 minutes). Vaporetto is now
ready for use.
2. CONNECTION OF ACCESSORIES
2.1 To connect the extension tubes to the
grip, the large brush and the lance joint,
simply join them to one another until the
accessory locking button clicks into place
(9). To release the accessories simply hold
the button down and separate the
components (9). Before using the
accessories, make sure that they are firmly in
place.
2.2 To connect the small brush, the steam
concentrator, and the brush accessories to
the flexible hose or the extension hoses, they
must first be attached to the steam lance, so
that the two arrows located on the two
components line up (11)-(12). Then, connect
the accessory adapter turning it until it is
locked to accessory (13).
3. STEAM ADJUSTMENT
You can optimise the steam flow by means of
the steam adjustment knob (8). You can
increase the steam flow by turning the
control in an anti-clockwise direction. Turning
it in a clockwise direction reduces the steam
flow. Here are some suggestions for the
choice of steam flow level:
• Strong steam: for encrusted dirt, stains,
sanitising, grease.
• Normal steam: for carpets, rugs, glass, tiles
etc.
• Delicate steam: for vaporising plants and
cleaning delicate fabrics, upholstery,
wallpaper, parquet, laminate, etc.
4. CLEANING FLOORS
4.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
4.3 Attach the supplied cloth to the floor
brush, locking it in place with the special
lever hooks (10).
4.4Adjust the intensity of the steam by
turning the adjustment knob (8); for this type
of surface we recommend Medium level
steam.
4.5 Deactivate the steam lock (4)-(5) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam
hose.
4.6 Clean the floors by moving the brush.
5. CLEANING RUGS
5.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
5.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
5.3 Adjust the intensity of the steam by
WARNING: When first operating steam,
there may be some drops of water mixed
with the steam due to temperature
imbalances.
Direct the first jet of steam onto a rag.
WARNING: Never leave the filling bottle or
the funnel resting on the mouth of the boiler,
with the product connected to the power
supply, since this could cause burns.
WARNING: if steam is escaping from the
safety cap, switch the appliance off and
unplug it from the mains. Wait for one two for
the appliance to cool before unscrewing the
cap and screwing it back on.
Some accessories are contained in the ac-
cessory holder (15).
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: Do not use the appliance
without the cloth.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in
colour or deformations have occurred.
WARNING: Before cleaning fabrics with
steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
E
N
G
L
IS
H
| 29 |