LECOASPIRA PARQUET
52
ENGLISH
Applied to the 120° accessory (
E
), they combine an abrasive energetic action with the concentra-
ted steam on resistant surfaces.
To clean carpets, use the turbo-brush
(M)
: a turbine system increases effectiveness and efficiency
when vacuuming fabric surfaces.
The use of the turbo-brush on carpets revives the fibres thanks to the brushing action of the roller,
which opens the fibres, allowing for deep cleansing.
The mechanical rotary action of the turbo brush is ideal for removing animal hair from hard
surfaces, rugs and carpets, even shag carpets.
The turbo brush can be used as a traditional brush on hard surfaces since it has a by-pass system
which diverts the air flow directly to the suction pipe.
Use:
A cursor on the back of the turbo brush permits you to adapt it to any kind of surface: slide the
cursor (
M1
) to the left for hard surfaces, and slide it to the right for carpets and fitted carpeting. The
cursor adjusts the speed of the turbine system: when it is moved completely to the right, the turbine
works at the maximum rotation speed, while when it is moved completely to the left there is no ro-
tation and the brush operates as a normal floor brush.
The turbine can be easily accessed for cleaning thanks to the practical flap (fig.E).
If using the turbo brush on shag carpets and/or when you want the brush roller to move faster, you
may remove the rubber profile from the front of the brush (fig.E)
The mini turbo-brush is especially suitable for cleaning armchairs and sofas, the inside of cars, fa-
bric-lined walls, etc.
It removes dust, dandruff, fabric residues with ease. Useful for the prevention of allergies, since it
removes animal hairs by means of the mechanical action of the roller brushes.
The mini turbo-brush is also provided with a frame with hard rubber bristles to remove the more
stubborn dirt.
To remove the frame, press on the two pins at the side of the brush and separate the frame from
the brush (Fig. F) (do not use the frame on delicate surfaces).
To clean the mini turbo-brush, turn the locknut and remove the upper part of the mini turbo-brush
as shown in fig G. Clean the internal part of the brush and close it by repeating the steps for remo-
val but in the opposite order.
MINI TURBO-BRUSH (N)
TURBO-BRUSH (M)
BRASS BRUSHES (E4)
LECOASPIRA PARQUET - M0S10067 - 1T10:Layout 1
23/10/2013
9.31
Pagina 52
Summary of Contents for VAPORETTO LECOASPIRA
Page 1: ...PARQUET...
