7.4 For steam cleaning and
suction select Programme P3
for model
, P2 for the
model
, as indicated in
Section 3.
7.5 Wait for the indicators to
remain lit.
7.6 Disconnect the steam lock on the handle
(33) and hold the steam button down (34) to
start dispensing steam.
When releasing the steam button or after a
maximum of 150 seconds, the suction starts
automatically to dry the treated surface.
Suction stops automatically after a period of
time in proportion to the time the steam was
supplied.
If you need to restart the programme to
complete cleaning of the surface, just press
the steam button again.
8. CLEANING GLASS, WINDOWS
AND TILES
Make sure you have prepared
the appliance following the
instructions
provided
in
Section 1 and that you have
selected Programme P4
for
model
, P3 for the
model
, as indicated in Section 3.
8.1 Wait for the indicators to remain lit.
This
programme
alternates
steam
and
suction to remove grease and polish the
surfaces, removing smears and dissolving
limescale deposits.
8.2 Connect the nozzle for frames (G) to the
handle (A) or to the extension tubes (C)(22-
23)
and
attach
the
window
cleaning
accessory (G1)(24).
Ensure that the steam lock on the handle is
deactivated (33).
8.3 Press and hold the steam trigger on the
handle (A) and steam the surface abundantly
to dissolve the dirt.
8.4 When releasing the steam button or after
a maximum of 30 seconds, the suction starts
automatically. Suction stops automatically
after a period of time in proportion to the
time the steam was supplied. In any case, it is
possible to stop the programme manually by
pressing the suction button.
If you need to restart the programme to
complete cleaning of the surface, just press
the steam button again.
Once the cleaning cycle is finished, it is
possible to start suction by pressing the
suction button to remove any residual
humidity.
The combined use of steam and suction
allows the most efficient sanitising of the
surface,
dissolving
dirt,
and
eliminating
grease and germs, and above all allows
drying of the surface.
9. CLEANING BEDS/MATTRESSES
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
9.1 For suction only, connect the nozzle for
frames (G) to the handle (A) and follow the
instruction indicated in point 4.1.
9.2 For steam cleaning and suction use the
nozzle for frames (G) with the cap cloth
(I)(25) attached and connect it to the handle
(A) or to the extension tubes (C)(22-23).
9.3 Follow the instructions provided in points
4.1 and 4.2.
Ensure that the steam lock on the handle is
deactivated (33).
9.4 It is possible to use the suction and steam
features either together or by alternating
them, activating both as described in the
previous points.
Combined use of steam and suction allows
the most efficient sanitising of the surface,
dissolving dirt and removing grease, germs
and mites; it allows brightens the colour of
fibres and dries surfaces more quickly.
The suction speed and the quantity of steam
are preset and therefore they cannot be
adjusted manually.
WARNING: To clean glass surfaces in
particularly
cold
seasons,
preheat
the
windows starting to vacuum from a distance
of about 50 cm from the surface.
FAV80
FAV70
FAV80
FAV70
The suction speed and the quantity of steam
are preset and therefore they cannot be
adjusted manually.
WARNING:
Before
cleaning
leather
or
fabrics
with
steam,
consult
the
manufacturer’s instructions and always carry
out a test on a hidden part or on a sample of
the material. Allow the steamed part to dry
to make sure that no changes in colour or
deformations have occurred.
For safety reasons, engage the steam lock
on the handle during vacuuming.
E
N
G
L
IS
H
| 39 |
LECOASPIRA FAV70_80 - W1ES - M0S12126 - 1V01_FEV 1000-950.qxd 25/01/2021 15:52 Pagina 39
