19. TROUBLESHOOTING
If problems persist or are not listed above, please contact a Polti Authorised Service Centre
(www.polti.com for the updated list) or contact Customer Services.
FOR HANDY-PURE ONLY
PROBLEM
CAUSE
SOLUTION
FrescoVapor perfume is not
released when using steam.
FrescoVapor knob regu-
lation in OFF position
Please check the Fresco-
vapor level.
Turn the FrescoVapor regulation
knob in min or max regulation.
Fill the Frescovapor tank.
Steam too damp using Fre-
scoVapor.
The steam is mixing with
FrescoVapor.
Reduce the quantity of Fresco-
Vapor as desired, to reduce the
humidity of the steam.
FrescoVapor has been to in-
serted into the boiler.
--------------
Take it to Authorized Service
Centre
PROBLEM
CAUSE
SOLUTION
The appliance does not turn on.
No power.
Check that the appliance has
been disconnected from the
mains, as indicated in Section 1.
Does not dispense steam
Out of water
Steam lock activated
The boiler is not yet
pressurised.
Steam hose trapped or
twisted.
Add water to the boiler as de-
scribed in Chapter 12.
Deactivate the steam lock on
the handle
Wait until the steam indicator
light comes on.
Check that the steam hose is
not trapped or twisted.
Steam does not come out and
the cap won’t unscrew
Steam button broken.
Take the appliance to an Authori-
sed Service Centre.
The appliance is pressurized
but little steam comes out.
Steam adjustment dial set
to the minimum.
Adjust the position of the dial for
the desired increase.
Accessories are difficult to as-
semble.
The seals produce friction.
Lubricate the seals with silicone
grease or Vaseline, or alternati-
vely with a small amount of ve-
getable oil.
E
N
G
LI
SH
| 33 |
VT
HANDY_PURE_25PLUS_20 - M0S11268 - 1P07:FEV 1000-950.qxd
31/07/2015
15.59
Pagina 33
Summary of Contents for Vaporetto HANDY 20
Page 20: ...ITALIANO 20 ...
Page 66: ...ESPAÑOL 66 ...
Page 98: ... 98 ...
Page 99: ...www polti com ...
