POLTI Vaporetto DIFFUSION, Instruction Manual

Page: 24 / 84

CORRECT USE OF THE PRODUCT
This appliance is intended for home use as a
steam cleaner as described and in
accordance with the instructions provided in
this manual. Please read these instructions
carefully and keep them. If this manual is lost,
it can be consulted and/or downloaded from
the website www.polti.com.
Polti S.p.A. reserves the right to change
equipment or accessory specification without
prior notice.
Before leaving our factory all our products
are rigorously tested. This is the reason why
your Vaporetto may contain some residual
water in the boiler.
Correct use of the product is only as detailed
in this instruction manual. Any other use may
damage the appliance and invalidate the
warranty.
INFORMATION FOR USERS
Pursuant to European Directive 2012/19/EU,
regarding electric and electronic appliances,
this appliance must not be disposed of with
domestic waste, but sent to an official
collection facility. This appliance complies
with EU Directive 2011/65/EU.
The crossed-out bin symbol on the
appliance indicates that, at the
end of its useful lifespan, the
product must be disposed of
separately from other waste. Therefore, at
the end of its life, the user must hand over
the appliance to an appropriate collection
centre for electric and electronic waste or,
according to the legislation in force in the
country, leave the used appliance with the
distributor when buying a new product to
replace it. Proper separate waste
collection to facilitate the subsequent
recycling, treatment and environmentally
compatible disposal of the appliance helps
to prevent negative effects on the
environment and human health, and
promotes recycling of the materials the
product is made of. Unlawful disposal by
the owner may result in the sanctions
envisaged by current legislation.
WHICH WATER TO USE IN THE
BOILER
This appliance has been designed to function
with medium-hardness tap water between
8°f and 20°f. If the tap water is very hard, do
not just use demineralised water but a mix
composed of 50% tap water and 50%
demineralised water which is widely available
to purchase.
Warning: check the hardness of the water at
the technical office at your local council or
the local water supplier.
If you only use tap water, you can reduce the
formation of limescale by using the special
Kalstop (PAEU0094) anti-limescale product,
distributed by Polti, and available for sale at
all major domestic-appliance stores or online
at www.polti.com.
Do not use distilled water, undiluted
demineralised water, rain water or water
containing additives (e.g. starch, perfumes),
scented water or water produced by other
domestic appliances, by water softeners and
filter jugs.
Do not add chemical, natural, detergent, or
limescale removing substances, etc.
1. PREPARATION FOR USE
1.1 Unscrew the safety cap (1).
1.2 Fill the boiler with up to 200 ml of water,
using the jug (2).
1.3 Carefully screw the safety cap back on,
checking that it is completely closed (3).
This operation must always be carried out
when the boiler has cooled and with the
power cable disconnected from the mains.
1.4 Only for Vaporetto Diffusion it’s possible
to combine steam with FrescoVapor, a
natural deodorant which, in addition to
releasing a pleasant fragrance, eliminates bad
odours. Please refer to the instructions given
in section 7 for how to use FrescoVapor
products.
1.5 Connect the cable plug to an earthed
power supply of the correct voltage (8).
1.6 The “Steam Ready” lamp will turn on. Wait
for the steam ready indicator lamp to go out
(approx. 5 minutes). The appliance is ready
for use.
It is a good idea to check that the boiler is
empty before filling it.
WARNING: Never exceed the maximum
boiler fill level of 200 ml; always use the jug
supplied.
WARNING: If steam is escaping from the
safety cap, switch the appliance off and
unplug it from the mains. Wait for two hour
for the appliance to cool before unscrewing
the cap and screwing it back on.
E
N
G
L
IS
H
| 24 |
All manuals and user guides at all-guides.com