E
N
G
L
IS
H
| 23 |
1. PREPARATION FOR USE
1.1 Position Polti Vaporella Express on a sta-
ble, flat, heat-resistant surface.
1.2 Fill the tank with water (1) up to the MAX
line.
This operation must always be carried out
with the power cable disconnected from the
mains.
Thanks to the continuous refill system you do
not need to stop your ironing and wait for the
appliance to cool down because the tank can
be refilled as needed.
1.3 Release the iron from the rest (see 10.4).
1.4 Connect the cable plug to an earthed
power supply of the correct voltage (2).
1.5 Make sure you have completely unrolled
the water hose.
1.6 To turn on the appliance press ON/OFF
button
on the iron handle (3): the
light
(4) and the iron’s blue LED will flash. When
both lights stop flashing, the appliance is
ready to start ironing and produce steam.
2. STEAM IRONING
Polti Vaporella Express is equipped with an
intelligent iron, where the temperature is
perfect for ironing every kind of fabric.
Polti Vaporella Express has 2 steam settings
available with the SET button (5):
The MAX FUNCTION
- to easily iron even
the heaviest fabrics (4).
The ECO FUNCTION - allows you to save
energy whilst you iron and enjoy the best
possible performance at the same time, even
with the most difficult fabrics (cotton/de-
nim/linen) (6).
Press the steam button on the iron (7) to
start the steam coming out of the holes on
the soleplate. Start ironing the garments.
Releasing the steam button (7), the steam
flow stops.
3. THE STEAM-JET STEAM
BOOST FUNCTION
The STEAM BOOST function can be activated
for quick and easy ironing by double-clicking
the steam button on the iron (7). A powerful
blast of steam will allow you to speed up and
improve ironing, even on heavy fabrics, and
to remove the most difficult creases.
4. VERTICAL IRONING
The iron may be used in the vertical position
to remove creases from fabrics and/or to re-
fresh the fabric fibres, eliminating any resi-
dual odours.
Hold the iron in a vertical position, press the
steam button (7), and if permissible based on
the type of fabric, touch it lightly with the so-
leplate.
5. DRY IRONING / DELICATE FA-
BRICS
5.1 Ensure that section 1 has been followed.
5.2 Continue ironing without pressing the
steam button on the iron.
6. AUTOMATIC SHUT- OFF
After 10 minutes of inactivity, the auto shut-
off is shown by the flashing of both the blue
light and the clock symbol and signalled by
an acoustic buzzer repeated 6 times. To reac-
tivate Polti Vaporella Express, press the
steam button on the iron (7).
7. OUT OF WATER
The water level is always visible on the tank.
When there is no water in the tank, the red in-
dicator
displays on the iron handle (9).
WARNING: Do not leave the hot plate on
any
surface.
Use
the
Polti
Vaporella
Express vertical rest, placing the rear part
of the iron directly onto the ironing board
or surface on which you are ironing (8).
The appliance also comes with a handy
iron rest mat (fixed) with non-slip pads
designed to withstand hot temperatures.
When first using the steam, there may be
some drops of water leaking out of the
plate, this is due to thermal stabilization. It is
recommended that the first jets of steam
are not directed onto the fabric that needs
ironing.
The sound emitted on your appliance during
use is due to the water refilling system and
is quite normal.
When ironing dry, pay attention not to press
the steam button, since water could leak
from the soleplate.
ATTENTION: When the tank is empty, the
‘no water’ light will only flash after the
steam
button
has
been
pressed
continuously for about 40 seconds.
All manuals and user guides at all-guides.com
Summary of Contents for VAPORELLA EXPRESS VE30.10
