2. IRON TEMPERATURE ADJUST-
MENT
Before ironing an item of clothing, always
check the symbols on its label, for the instruc-
tions provided by the manufacturer.
Check, based on the following table, the most
appropriate type of ironing:
3. STEAM IRONING
3.1 Make sure that chapter 1 has been comple-
ted and regulate the temperature of the iron
(8)-(9) as described in chapter 2.
3.2 Press the increase “+” and decrease steam
“-” buttons to regulate the force of the steam
dispensed, depending on the type of fabric to
be ironed.
The steam’s intensity has 4 adjustment levels:
1 indicator light:
Light steam, ideal for synthetic or delicate fa-
brics.
2 indicator lights:
Medium/low steam, ideal for wool and fibres.
3 indicator lights:
Medium/strong steam, ideal for cotton, denim
and linen.
4 indicator lights:
Strong steam, ideal for denim and linen.
Wait until the indicator lights remain on and
the iron heating indicator light goes off.
3.4 Press the steam button (10) on the iron to
make steam come out of the holes on the pla-
te. Releasing the button, the flow stops. Pro-
ceed to iron the garments.
3.5 To have a continuous jet of steam move
the the continuous steam jet button forward
(11). The steam will continue to come out even
when the button is released. To interrupt the
supply, move the button backward (11).
4. VERTICAL IRONING
It is possible to use the iron vertically to remo-
ve creases from fabrics and/or to freshen up
the fibres, eliminating possible residual
odours.
Hold the iron vertically, push the steam button
(14) and touch the fabric slightly with the so-
leplate, if the type of fabrics allows it.
WARNING:
Do not place the hot iron on any
surface. Vaporella is equipped with an iron
rest mat with soft non-slip inserts designed
to resist high temperatures.
The indicator lights “Iron heating” and “Steam
ready” turn on and off during use. This indica-
tes that the electrical resistor has started to
work to keep the pressure of the boiler
steady. This is a normal occurrence, and it is
therefore possible to continue ironing.
When first using the steam, there may be
some drops of water leaking out of the pla-
te, this is due to imperfect thermal stabiliza-
tion. We therefore recommend that the first
jet of steam be directed onto a cloth.
Divide the laundry according to the symbols
on the garment labels or according to the
kind of fabric. Always start ironing with the
garments that require the lowest tempera-
ture, in order to reduce the waiting times
and avoid the risk of burning the fabrics.
ATTENTION: For low temperature we do not
recommend the use of steam since water
could come out from the holes on the sole-
plate. For medium temperature alternate the
use of steam and dry ironing to avoid water
leaking from the holes on the soleplate.
High temperature – cotton, linen:
Set the iron temperature adjustment knob
to the position
•••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob
to the position
••
Low temperature – synthetic, acrylic, ny-
lon, polyester:
Set the iron temperature adjustment knob
to the position
•
- Do not iron
- Steam ironing and steam treatment not
allowed
WARNING:
When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
Direct the first jet of steam onto a rag.
The sound emitted on switching on your ap-
pliance and periodically during use, is due to
the water refilling system and is quite normal.
E
NGLI
S
H
| 22 |
VL FOREVER 670-675 PRO - M0S10320 - 1P05:FEV 1000-950.qxd
10/06/2015
10.06
Pagina 22
