POLTI Forzaspira, Instruction Manual

Page: 24 / 76

use a damp cloth and tap water.
Do not use detergents of any type.
Store the appliance in a cool, dry place, avoi-
ding extreme cold and heat, to protect bat-
tery performance.
5.1 CLEANING THE FILTERS
To clean the filters, proceed as follows:
- Empty the dust-collector tank as described
in Chapter 4.
- Press the dust-collector tank release button
(16).
- Remove the filter unit (17).
- Separate the filter protection mesh from the
filter (18).
- Rinse all the components under running wa-
ter and let them dry naturally away from
sources of heat for at least 24 hours.
- Replace everything repeating the steps de-
scribed previously in reverse order.
The filter should be replaced every 6 months.
The filters are sold at household appliance
stores, at Polti authorized service centres and
at www.polti.com.
5.2 CLEANING THE BRUSH
To clean the brush, proceed as follows:
- Separate the brush from the vacuum unit by
pressing the release button (4).
- Turn the brush over and lift the cylinder lock
hook (19).
- Remove the bristly cylinder (19).
- Clean the bristly cylinder of the brush (20).
- Reposition everything and close the brush
again by performing the operations descri-
bed previously in reverse order.
6. STORAGE
6.1 Ensure that the appliance is switched off
and not charging.
6.2 Empty the dust-collector tank.
6.3 Replace the appliance in the vertical posi-
tion.
WARNING: Check that all the components
of the dust-collector tank are dry before
reassembling them.
WARNING: Check the filters during cleaning.
Replace the filters when visibly damaged.
WARNING: Do not clean the filter with the
brush as it can be damaged, thereby redu-
cing the filtering capacity. Do not use deter-
gents, do not rub the filter, and do not wash
it in a dishwasher.
E
N
G
L
IS
H
| 24 |