POLTI Forzaspira, Instruction Manual

Page: 19 / 76

preparation, maintenance or cleaning operation.
In order to reduce the risk of accidents, including: fires,
electrocution, personal injury and scalding, both during use
and during preparation, maintenance and storage, always
take the fundamental precautions listed in this manual.
RISKS CONNECTED TO THE POWER SUPPLY
ELECTRIC – ELECTROCUTION
• The earthing system and highly sensitive residual-current
circuit breaker, complete with magnetothermic cut-out for
your domestic system, guarantee safe use of electrical
appliances.
Therefore, for your own safety, check that the electrical
system to which the battery charger is connected complies
with current laws.
• The battery charger is used to charge the batteries located
inside the appliance. Do not use the appliance with the
battery charger connected.
• Do not connect the battery charger to the mains if the
voltage does not correspond with that of the domestic
electrical circuit in use.
• Do not overload the sockets with adaptors and/or
transformers. Only connect the battery charger to a single
socket with current that is compatible with the supplied plug.
• Electrical extension leads that are unsuitable for the power
rating or which are not compliant with law may overheat
and possibly lead to short-circuiting, fire, power outage or
damage to the equipment. Only use certified extensions,
suitable for the power rating, that support at least 10A.
• To remove the battery charger from the socket, do not pull
the power cable, but hold the plug itself to avoid damage to
the plug and the cable.
• Do not pull or jerk the battery charger cable or expose it to
stress (twisting, crushing or stretching). Keep the battery
charger cable away from hot and/or sharp surfaces and
elements. Avoid squashing the battery charger cord in
doors or windows. Do not pull the battery charger cable
tight around corners. Avoid stepping on the battery charger
E
N
G
L
IS
H
| 19 |