background image

CINDERELLA TRIO

29

ENGLISH

NOTE:

For daily use, we recommend always

leaving the battery charger connected and
charging the battery whenever the broom is
not in use, so that the equipment is always
ready and charged. 
If you do not anticipate using the equipment
for long periods of time, disconnect the bat-
tery charger plug to avoid wasting energy.
It is normal for the power supply to heat up
during charging. 

The battery is a component that wears out
easily and is guaranteed for a period of 6
months from the date of purchase.

BROOM ASSEMBLY

• Insert the battery (

7

) in its housing on the

vacuum unit (

10

), pressing until a click is

heard (fig.3).

• Connect the motorized brush (

12

) to the va-

cuum unit (

10

) as shown in Fig. 4, making

sure that the 2 contacts on the brush line up
with the two holes located on the vacuum
unit.

Press the two parts until you hear

the hook click.

• Connect the handle (

1

) to the vacuum unit

(

10

) (Fig.5) making them line up until you

hear the hook click.

• It is possible to attach the accessory sto-

rage (

4

) to the handle (

1

) attaching it so that

it meets its seat located on the handle
(Fig.6).

USE

• Turn the equipment on with the ON/OFF

switch (

6

). The equipment will start to va-

cuum and at the same time the motorized
brush (

12

) will start working making the bri-

stles turn.
The combination of the suction and the ro-
tating bristles gives the equipment excellent
suction power.

All the dirt suctioned is collected in the dirt
collection container (

11

).

To keep the equipment’s efficiency high,
empty the dirt collection container at the end
of every use (

11

).

To empty the dirt collection container, follow
the instructions listed in the paragraph “
emptying and cleaning of the dirt collection
container (

11

)”.

The equipment can also be used as a porta-
ble vacuum, by holding the vacuum unit (

10

)

by the special handle (

9

).

To best take advantage of the equipment, fol-
low the instructions provided below:
• Separate the handle (

1

) and the motorized

brush (

12

) by pressing the accessory re-

lease button (

5

) (Fig.7).

• Insert the lance (

2

) in the input of the va-

cuum unit (

10)

(Fig.8). 

It is also possible to connect the bristle
brush (

3

) to the lance as shown in Fig.8.

CINDERELLA TRIO_7:FEV 1000-950.qxd

30/01/2013

14.48

Pagina 29

Summary of Contents for CINDERELLA TRIO









Reviews: