14
TR OUBLESHOOTING
Problem
Solution
No sound
was
recorded.
Make sure that a fresh AAA battery is installed and correctly oriented in the battery
compartment.
Make sure the power switch on the microphone is set to the ON position and the LED
indicator is on.
Make sure the 3.5 mm mini plug is connected to the correct AUDIO INPUT jack on the device
to which you are recording.
The sound is
distorted.
Make sure the 3.5 mm mini plug is fully plugged into the audio input jack of your camera or
recorder.
If your camera or device has an input control, decrease the mic gain (audio input level) on
your camera until the meter reads below peak level at the loudest point of the audio.
Reposition the VM-101 further away from the sound source.
(See
:
Recording Tip under Recording with the VM-101)
