UM1A
8
BASIC OPERATION
Power On/Off
Press the
POWER
button (4) to turn the unit on/off.
Volume
To increase the volume, rotate the
Encoder Knob
(5) clockwise. To decrease the volume,
rotate the
Encoder Knob
counter-clockwise.
Mute
Press the
Play/Pause
button (3) on the control panel to mute the audio output. Press
Play/Pause
button again to restore the audio output to the previous level.
Mode
Press the
MODE
button (7) on the control panel to enter mode selection display. Continue to
press the MODE button to page through the available playback modes. Press the associated
soft button for the desired playback mode as displayed.
Audio Menu
Press the
MENU
button (6) on the control panel to access the audio menu. You can navigate
through the audio menu items by rotation the
Encoder Knob
and pressing the
Encoder
Knob
to make selection. Rotate the
Encoder Knob
clockwise to increase and
counter-clockwise to decrease. The unit will automatically exit the audio menu after 10
seconds of inactivity. The following menu items can be adjusted.
Bass Level
Use the
Encoder Knob
to adjust the Bass level range from “
-
6” to “+6”.
Mid-Level
Use the
Encoder Knob
to adjust the Mid-level
range from “
-
6” to “+6”.
Treble Level
Use the
Encoder Knob
to adjust the Treble level range from “
-
6” to “+6”.
Balance
Use the
Encoder Knob
to adjust the Balance between the left and right speakers from “L12”
(full
left) to “R12” (full right).
Fader
Use the
Encoder Knob
to adjust the Fader between the rear and front speakers from “R12”
(full
rear) to “F12” (full front).
Sub Level
Use the
Encoder Knob
to adjust the Subwoofer
level from “
0
” to “
40
”.
Equalizer
Press the
EQ
soft
button to turn on the equalization function and select between five
pre-defined bass and treble curves: USER > FLAT > ROCK > CLASSICAL > POP.
Loudness
Press the
LOUD
soft
button to toggle loudness on/off. When listening to music at low
volumes, this feature will boost the bass and treble ranges.
ZP (ZONE PRESET)*
Press the
ZP
soft
button to turn on the equalization function and select between twenty-four
pre-defined zones.
Use the
Encoder Knob
to navigate the list of zone presets; then press the Encoder Knob to
select.
*(
for use with UMZC4A, sold separately
)
System Menu
1.
Press and hold
the
MENU
button for more than 3 seconds to enter the system menu.
“SYSTEM MENU” will appear on the display
.
2. Rotate
the
Encoder Knob
to navigate the system menu and highlight desired item.
3. Press
the
Encoder Knob
to select the item and rotate the
Encoder Knob
to adjust
selected menu item.
4. Press
the
Encoder Knob
again to enter your selection and return to the menu list.
