background image

  

For more information visit our website at www.polkaudio.com

                    

3

INSTALLING YOUR SPEAKERS

Please read the owner’s manual first

Mounting and setting up your Patio25 Outdoor 
Loudspeakers will be easier if you read the  
owner’s manual first. If you don’t follow the 
instructions in the owner’s manual, you can 
void the warranty. So please, read the manual.  
If you seem unsure about a step, don’t hesitate  
to call our Customer Service Department.  
They are there for you, they really are.

Getting started:

If you’re going to install your Patio25  
Loudspeakers, here are tools you’ll need.
  1. #2 Phillips-head screwdriver
  2. Power drill
  3. Eye and ear protection
  4. Dust mask
  5. 3/32" (2.5 mm) wood bit,  
       or ¼" (6.0 mm) masonry bit

Wire recommendations

These recommendations are for the speaker wire 
you connect from your amplifier/receiver to each 
Patio25 loudspeaker:

Runs

Gauge

Lengths up to 20' 

18

Lengths greater than 20' 
but less than 50'

16

Lengths greater than 50'

14

Where to locate your Patio25 loudspeakers

Patio25 Loudspeakers may be mounted either  
vertically or horizontally. For the best sound, we 
recommend spacing them at least 6 feet apart; 
always aim them into the listening area.

CAUTION: 

Never mount the loudspeakers on  

surfaces that are not sturdy enough, or that have 
electrical wire or plumbing concealed behind them. 
If you are unsure about installing the bracket, 
please contact a qualified professional installer.

CAUTION:

 Never install the loudspeakers near 

any heat sources.

CAUTION:

 Never hang anything from the brackets 

or speakers. Never place items on top of the 
speakers. The brackets are designed to support 
only the weight of the Patio25 Loudspeakers.

Important steps to take before mounting 
your speakers

1. Check local building codes before you install  
  your Patio25 Outdoor Loudspeakers. If you’re  
  uncomfortable installing these loudspeakers,  
  contact a qualified home audio installer.
2.  Measure the length of each speaker wire  
  needed to connect your loudspeakers to  
  your amplifier. 
3. Determine the best route for your speaker  
  wire so that it is protected.
4.  Make sure that the speakers cannot fall  
  and cause injuries.

Summary of Contents for Patio25

















Reviews: