28
SANDOR PLUS SMA
POLITEC | INSTALLATION MANUAL - VER.2.6
17.1 Transmitter optics
Power supply LED
Power supply
SW4 heaters
Additional tamper
24V
12V
1 2
3 4 5 6 7
5
ON
TX1
1 2 3
4
6
ON
TX2
ON
TX3
ON
TX4
With DIP 7 in ON (as default) and with the power supply LED on, the TX optic functioning is verified.
The power supply of the heaters is set by default to 24V; 12V can be used by changing the jumper
configuration (SW4) on all optics and on the MES 9 C board.
The voltage can be both AC and DC.
N.B.:The settings relating to the addressing of the optics are already set by default.
Test button
Test LED
17.Appendix B: maximum configuration of 4TX +4RX optics
