Polestar EAN7221 User Manual Download Page 27

Page: 27 / 93

EAN7221/7260/7360

Playback

Playback is designed as a quick way to check recent recordings that were triggered by Events that were
configured to “Record to micro SD Card” in the

Event Management

(see

7.3.2 Event

). You can remotely play

back the recordings stored in the on-camera micro SD card on the Web interface, or play back the
recordings stored in the computer using VLC media player, Windows Media Player 12 or other players
support AVI / MP4 format.

Note:

The Playback page is only accessible once the on-camera micro SD card is inserted and active.

Please refer to

Appendix A

for the tested card brands.

6.1

Remote Playback Using Playback Page

On the Live View Window, click the

Playback

button

to open the Playback page.

Search by File:

Click the

Search

button under the “Show All Files on micro SD Card” header to

search for all recording files on the on-camera micro SD card. Search results will be displayed in the

Summary of Contents for EAN7221






























































































Search results

Summary of Contents for EAN7221

Reviews:

Related manuals for EAN7221

Brands by name

Popular brands

Polestar EAN7221, User Manual

Search results

Summary of Contents for EAN7221

Reviews:

Related manuals for EAN7221

Brands by name

Popular brands