manualshive.com logo in svg

Polartec Heat Blanket, Instruction Manual, Page: 10 / 13

Share
Download
Polartec Heat Blanket Instruction Manual Download Page 10

Locating Your Remote for Easy Access

The remote comes with a snap-on base that allows you to place it on locations
other than the night stand. By attaching the snap-on base to the remote with a
bed sheet in the middle, the remote is close at hand during the night. Another
location is on the side of the mattress attached to the fitted sheet. 

Removing the Snap-0n Base from a Remote

The remote comes with a base attached. To remove:

1

. Grab the base so that one set of the ears on the base are under your thumb.

2

. Reach through the areas that have been cut out of the base to grab 

the remote.

3

. Snap the remote out of its base.

Attaching the Remote to Bedding

1

. Choose the location of the remote that best fits your needs.

2

. Remove the snap-on base by pushing the snap away from the remote using

the access holes in the base for leverage. 

3

. Push the remote and base together with the fabric in-between. The remote’s

base should snap together lightly with the remote.

YOU MUST REMOVE THE WIRELESS REMOTE CONTROLS BEFORE WASHING
THE BEDDING!

Removing the Remote from Bedding

Grasp the fabric on each side of the remote. Pull gently on the fabric making
sure that the remote does not drop onto a hard surface. You may remove and
re-attach the snap-on base at any time.

Possible location of remote on fitted sheet

Attaching a remote
onto a sheet

Removing snap-on base from remote

10

INSTRUCTION MANUAL OP  8/20/01  10:45 AM  Page 8

Summary of Contents for Blanket














Reviews:

No comments