User Guide
P. 5
Door and Hood Monitoring
The remote control will warn the user when any sensor zone is either open or under attack:
If a door is left open, the remote control will beep once and the door will start flashing on the
Vehicle icon of the display. After If the door is closed, the remote control will beep a second
time and the door image will stop flashing after five seconds.
If the hood is left unclosed, the remote control will beep once and the hood will start flashing
on the Vehicle icon of the display. After If the hood is closed, the remote control will beep a
second time and the hood image will stop flashing after five seconds.
If the alarm detects an intrusion either through a door or through the hood, the alarm will be
triggered. This event will be reported on the remote control by the Intrusion Icon ( ) which
will start flashing on the display. This will go on until either the
LOCK
or the
UNLOCK
button is
pressed on the remote control.
LCD Transmitter Operation (First Car Control)
Basic Vehicle Operation
FUNCTION
BUTTON PRESSED
ICON
BUZZER
INSTRUCTIONS /DESCRIPTION
LOCK
1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK
2 Beep
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
TRUNK or AUX 3
1 Beep
Trunk output
START *
(see Runtime
Options below)
+
Melody
Starts the engine
STOP
None
Melody
Stops the engine
Light ON
ON for 10 seconds
Press the
button once.
Transmitter Mode Selection
FUNCTION
BUTTON PRESSED
ICON
BUZZER
INSTRUCTIONS /DESCRIPTION
POWER-SAVING
MODE
+
Melody
VIBRATION MODE
+
Vibrates twice
ALARM CLOCK
MODE ON/OFF
+
Melody
Press once to switch the Alarm
Clock
ON
Press twice to switch the Alarm
Clock
OFF
Time or Alarm Clock Adjustments
User
Transmitter
1.
Press and hold the
FUNCTION
button until a
beep is heard
The backlight will turn on the moment the
FUNCTION
button
is pressed.
2.
Upon hearing the beep, release the
FUNCTION
button,
...........................
is displayed
3.
Press and hold the
FUNCTION
button once
more
