Polarstart PS-4600TW, User Manual

Page: 6 / 14

P. 6
User Guide
PS-4600TW
Example: If the vehicle was programmed with a run time cycle of 15 minutes and the engine
was running (under a remote start) for 5 minutes (meaning there is 10 minutes left in
the run time cycle), LEDs #1 #2 and #3 would light up. LED #3 will turn itself off
when there will be 8 minutes or less left in the run time cycle.
Multi-Level Features
(
default state)
Basic Features (press the
SHIFT
button 1X)
SHIFT
¾
LOCK: .......................................................................
aux 2
SHIFT
¾
TRUNK:.....................................................................
status request
SHIFT
¾
START/STOP............................................................
cold weather
Multi-Car Operation (press the
SHIFT
button 2X)
SHIFT
¾
SHIFT
¾
LOCK
:......................... 2 nd car lock
SHIFT
¾
SHIFT
¾
UNLOCK
:..................... 2 nd car unlock
SHIFT
¾
SHIFT
¾
START/STOP
: ............... 2 nd car start/stop
SHIFT
¾
SHIFT
¾
TRUNK
: ....................... 2 nd car trunk
Customized Features (press the
SHIFT
button 3X)
(
May not be applicable for certain vehicles
)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
SHIFT
¾
SHIFT
¾
SHIFT
¾
......................
LOCK
: customized feature 1
SHIFT
¾
SHIFT
¾
SHIFT
¾ ......................
UNLOCK
: customized feature 2
SHIFT
¾
SHIFT
¾
SHIFT
¾
......................
TRUNK
: customized feature 3
SHIFT
¾
SHIFT
¾
SHIFT
¾ ......................
START/STOP
: customized feature 4
Setting Transmitter Features (press the
SHIFT
button 4X)
SHIFT
¾
SHIFT
¾
SHIFT
¾
SHIFT:
LOCK
:..............................full beep ................................................... (LED #1 flashes)
UNLOCK
:..........................half beep .................................................. (LED #2 flashes)
START/STOP
:....................disable beep............................................. (LED #4 flashes)
TRUNK
:............................save modifications ................................... (LED #3 flashes)
By default, the multi-level features are programmed as follows:
x
x
x
x
x
x
Level 1 (Basic Features)
Level 2 (Multi car operation)
Level 3 (Customized Features)
To access a feature that is programmed as level 1, press the
SHIFT
button once followed by the
desired function.
To access a feature that is programmed as level 2, press the
SHIFT
button twice followed by the
desired function.
To access a feature that is programmed as level 3, press the
SHIFT
button three times followed
by the desired function.
Your installer can customize the system as to personalize these multi-level features in an order that
best suits you. Your options are:
Option 1:
Level 1
(requires pressing the
SHIFT
button 1X)
Æ
Multi car operation
Level 2
(requires pressing the
SHIFT
button 2X)
Æ Basic features
Level 3
(requires pressing the
SHIFT
button 3X)
Æ
Customized features
Option 2:
Level 1
(requires pressing the
SHIFT
button 1X)
Æ
Basic features