1.
Connect small pole and pipe (48*2.5mm diameter).
2.
Drill 2 pcs of symmetrical screw holes (12mm diameter) above a
diatance of 20mm at the upper end of pipe.
3.
Clockwise 90
°
in the hole above the distance of 20mm, and drill 2
pcs of symmetrical screw holes (12mm diameter) above a diatance of
38mm at the upper end of pipe.
4.
Fasten the pipe between wind generator and tower with 4 pcs screws
(M10).
Note:
The joints between wind generator and pole need a torque of 80nm.
Fix with locking grain rubber in suitable condition.
