background image

 

11 

  Function Selection Menus (continued)   

Channel Label

This feature allows you to label channels in up to 5 characters. 

Use the up or down arrow key to highlight 

Channel Label

, and the right arrow key 

to call up the sub menu. 
1. Use the up or down arrow key to choose 

Channel

, and the left or right arrow 

key to select the channel (the current channel is default). 

2. Choose 

Name 

in the same way as above. Use the left or right arrow key to 

select one of the characters (including 0-9, &, /, - and A-Z) cyclically, and the 
up or down arrow key to move the cursor. 

 

Notes: 

1. If a channel has been labeled, the TV will display the corresponding 

channel name when shifted to the channel. 

2. In the AV mode, channel setting menu is not available. 

 

Timer Setting Menu 

This menu allows you to set a time for the TV to turn on or off and tune the TV to 
a specific channel at preset time. 

Access: 

From the Main menu screen, press the left or right arrow key until 

Timer Setting 

is highlighted. Then the Timer Setting menu is displayed. Use the 

up or down arrow key to move between the various settings, and the left or right 
arrow key to adjust them. 

 
Notes: 

1. Only after you set the current time, can you set On Time, On Channel and Off 

Time. 

2. On/off time can be set to one of the three modes: Off, Once and Always. 

 

Parental Guide Setting Menu 

This feature allows parents to block certain programs from being viewed, based 
on the programs' rating. 

Access: 

From the Main menu screen, press the left or right arrow key until

 

Parental Guide Setting 

is highlighted. In order to access this menu, you must first 

enter a pass code. The factory default is 

1225

 
Parental Guide: 

Only with 

Rate Setting On

, are 

TV-Rating 

and 

MPAA-Rating 

displayed. Press the up or down key 

to move between the two items and right arrow key to access the TV-Rating or MPAA-Rating grid. 
 

TV-Rating: 

Using the up or down arrow key to navigate between the ratings, press the left or right arrow key to 

select 

or 

B

. A 

indicates a rating which is unblocked and a 

indicates a rating which is blocked. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Channel Label   

 

Channel     121 

Name: 

     ( 

 

 

 

 

Move:

 

↑↓

     

ADJ:

 

 

Exit:

MENU

 

Timer Setting 
Current Time     01:00AM 

 Time   Channel  

1: 07:30PM  121         Once 
2: 04:00PM  80          Always 
3: 09:45AM  40          Off 
4: - - : - -     ---                Off 
5: - - : - -     ---                 Off 
Off    Time       - - : - -      Always 

Move:

 

↑↓

   

 ADJ:

←→

Exit:

MENU

 

 

 

Enter Password 

Parental Guide Setting 

Password         - - - -

 

 

 

 

Move:

 

↑↓

 

 

ADJ:

←→

 

 Exit:

MENU

Parental Guide     

Rate Setting             On 
TV-Rating                             
MPAA-Rating                       
Password Setting           

       

TV-Rating     

      Rating              FV    D    L    S    V

 

     

TV-Y

   

 

U

 

      TV-Y7        U    U 
      TV-G          U 
   TV-PG    U      U  U  U  U 
   TV-14     B           B    B  B    B    

    TV-MA      B             B  B   B

Move: 

↑↓

      

ADJ:

 

←→

   

 Exit:

MENU

   

Summary of Contents for TTM-2901L


















Reviews: