EN-10
EN-9
powered on and standby for recording, it will recording automatically once
the device detected any motion in front of lens within 2.5m. The device will
stop recording if no motion detected after 10 seconds recording, return to
standby recording until next motion detected.
Notes
:
1. When the battery is fully charged and is in good condition, the device can
record continuously for about 90 minutes.
2. As the device is used, the battery storage capacity will decrease
gradually, This is normal phenomenon for the battery.
3.1.4 G-sensor Collision Recording Protection
If the setting for G-sensor Sensitivity is Low / Medium / High, the key icon
will appear on the screen when a collision is detected while recording, the
current movie clip will be protected automatically and can not be replaced.
The default setting is Medium.
3.1.5 Wifi On / Off
On the Video Mode, press
Up
button can turn Off / On the wifi.
3.1.6 Audio On / Off
On the Video Mode, press
down
button can turn Off / On the audio.
3.1.7 Snap shot
During Playing Video, press
power
button can snap shot.
3.2 Taking Picture
To take a picture make sure the
Still Capture
Mode is selected. Press
the
REC
button to take a photo. Taken photos are saved on SD Card.
3.1.1 The Recording Screen
3.1.2 A Key Protection
During recording, press
Up
button to protect current video, the key
icon appears on the screen, the current movie clip will be protected and
cannot be replaced (the default setting for a movie clip is 3-minute), the next
movie clip will unlock automatically and can be replaced if the SD card is full.
Remove the protection for current movie clip:
Press
Up
button again to remove protection for current movie clip, the
key icon will disappear from the screen, the movie clip will not be
protected and can be replaced if the SD card is full.
Note:
The recording will stop automatically and the screen will show SD card is full
if the SD card is full of protected files. To continue recording, please change
a SD card or delete the protected files manually.
3.1.3 Motion Detection
If Motion Detction is activated (the default setting is Off
,
the motion
detection icon appears on the left of the screen, and if the device is
Video mode
Loop recording
Exposure value
Record audio
System date & time
Remain memory time
SD Card
Resolution
Polaroid
·
S205W
Polaroid
·
S205W
Battery status
Summary of Contents for S205W
Page 44: ......