EN-8
EN-7
2.4 Powering the Device On / Off
2.4.1 Auto Power On / Off
Once the vehicle engine is started, the device automatically turns on and
recording (must have SD Card). After the car engine stopped, the device will
automatically save the last recorded file and shutdown.
2.4.2 Manual Power On / Off and Reset
2.4.2.1 Manual Power On / off
1. Connect one end of power connector to USB port on the device.
2. Plug the other end of the power adaptor to the cigarette lighter socket of
your vehicle. Once the vehicle engine is started, the device automatically
turns on.
Press Power button to turn it on.
To power off the device press the
Power button with 3 seconds.
2.5 Set the Date / Time
To set the correct date and time, press button three times to enter the
setting mode, press
Up / Down
button to select
Date/Time
, press
OK
button to enter date / time setting, then press
Up / Down
button
to adjust the value, press
OK
button switch to next setting, after finished
all the settings, press
Mode
button to back Setup menu, press
Mode
button to the Video mode.
2.4.2.2 Reset the Device
2.6 Mode Selection
The default setting is
Video
Mode , press
Mode
button can switch
to
Still Capture
Mode
，
Playback
Mode and
Setting
Mode .
3 Using the Driving Recorder
3.1 Recording Videos
Before starting recording, please insert a SD card (not included) into the SD
card slot in the device, and make sure the Video Mode is selected. Press
REC
button to start recording, the video recording icon flashes on
the screen. The recorded files are saved on the SD card. To stop recording,
press
REC
button again.
In case the device fails to function normally
due to unknown causes, Remove the
battery and reinsert, then press the
button to restart the device.
Polaroid
·
S205W
Polaroid
·
S205W
Summary of Contents for S205W
Page 44: ......
