- 17 -
Power Supply
Attaching the Battery Pack
Refer to the following steps for attaching the Battery Pack:
1. Place the DVD Player on a soft and smooth surface with the bottom of the unit
facing UP, direct the battery so that the battery contacts and the five plastic tabs
are aligned with the matching contacts and tab recesses on the player (see Fig.1).
2. With one hand on the player to prevent it from moving, push the battery pack on
to the player (see Fig.2).
3. Slide the Battery Pack until you hear it click and lock into place (see Fig.3).
Fig.1
Fig.2 Fig.3
Charging the Battery Pack
The battery pack must be attached to the DVD player to charge it using the supplied
AC Power Adapter.
1. Attach the battery pack to the DVD player as shown above.
2. Plug the supplied AC Power Adapter into the player’s power jack marked
with ”DC+9.5V IN”, which is located on right side of the DVD Player.
3. Plug the other end of the AC Power Adapter Cord into a household AC Outlet as
shown below.
