2
Press the Label button to display a blinking cursor (b) under
the first empty character space in the LCD panel label field.
If no default label exists, the cursor appears in the first
character space of the label field.
3
Press the Erase button once to erase the last character of the
label, twice to erase the last two characters, etc. To erase the
entire label, hold the Erase button for 3 seconds or longer.
If no picture label exists, it is not necessary to press the Erase
button.
4
To insert a new character at the cursor location, press the
Scroll button until the desired character appears in the space.
Press the Enter button to store the character and move the
cursor to the next space.
Note: Only upper case (capital) letters, numerals, hyphen (-)
and space are available for labels.
To leave a blank space, press the Enter button without
entering a character.
5
Repeat step 4 until you have completed the label (up to 10
characters and spaces).
52
