background image

- 8 - 

Remote Control                                               

Prepare the Remote Control 

Gently push the back cover to open the battery 

compartment. 

 

 

 

 

 

 

 

 

Insert two batteries (1.5V, size AAA) into the 

compartment; please make sure the polarity 

matches the symbols on the inside the 

compartment. 

 

 

 

 

 

 

 

 

Gently push the back cover into place to close it. 

 

 

 

 

 

 

 

z

 

Under normal use, the battery should last 

for about six months. 

z

 

Remove the battery when the remote is not 

in use for a long time.

 

 

Using of Remote control 

Point the remote control no more than about 

7m from the remote control sensor and within 

about 60 degrees of the front of the unit. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The operating distance may vary 

depending on the brightness of the room. 

 

Notes: 

 

Do not point bright lights directly at the 

remote control sensor. 

 

Do not place objects between the remote 

control and the remote control sensor. 

 

Do not use this remote control while 

simultaneously operating the remote 

control of any other equipment.   

 

 

Summary of Contents for FLU-1514SA



























Reviews: