17
2.5 Powering the Device On / Off
2.5.1 Auto Power On/Off
Once the vehicle engine is started, the device automatically turns on.
If the Automatic Record function is enabled, the recording will
automatically start right after the device turns on.
Please refer to Set Automatic Record ( 2.6.1).
2.5.2 Manual Power On/Off and Reset
2.5.2.1
Manual Power On
Push the power switch and make sure that the power switch locks
on the memory card slot.
On
2.5.2.2
Power Off
Push the power switch and make sure that the memory slot is
released and the device starts power off sequence. Do not power on
the device when it is in the power-off sequence, or the recorded file
may become corrupt.
Off
2.5.2.3
Reset the device
In case the device fails to function normally due to unknown causes,
push the power switch and verify the memory card is in the
removable state; wait for 7 seconds and push the power switch
again to restart the device.