English
7
Connect the SCSI cables:
Place the DMC camera at the end of the SCSI chain as shown or
between the computer and other SCSI devices. Use the shortest
possible cables.
Note:
Turn the computer, camera and all other SCSI devices off
before connecting or disconnecting any cables.
Do not connect
the camera to the parallel connector on your computer.
Doing so could damage the camera or computer.
Set termination:
The last device in a SCSI chain must be terminated (or have
termination on), while all other devices must be unterminated (or
have termination off).
If the camera is the only device connected to your SCSI host
adapter or the last device in a SCSI chain, set the camera
termination to on (1). Otherwise, set termination to off (0).
Termination instructions for your other SCSI devices are provided
with the devices.
Note:
Do not use an external, passive terminator to terminate the
camera. If another device is at the end of the SCSI chain, that
device must be terminated with an active terminator for proper
camera operation.
Other SCSI device
(not terminated)
Computer
DMC
I
e camera
termination on (1)
Termination
switch
DMC_ENG.fm Page 7 Thursday, May 20, 1999 3:06 PM
