English
6
4
Connect the Camera to the Computer
The DMC Ie camera requires a SCSI host adapter in your
computer. If your computer does not have an adapter, you must
install one (see page 11). If your computer is a PC-compatible with
a SCSI adapter, but the adapter is connected to a hard drive or CD-
ROM drive, installing a second adapter is recommended.
Set the camera SCSI address:
Each device connected to a SCSI host adapter must have a unique
address from 0-6. To assure a unique address for the camera,
determine the addresses of any other SCSI devices:
Turn the camera power switch to off (0) and set the SCSI address
switch to a value not used by any other device.
Note:
The address is preset to 4. Do not change it unless another
device is using 4. Other addresses typically available are 2, 5 and 6.
Power Mac or PowerPC
Windows 95, 98 or NT
•
Run Apple System Profiler,
usually on the Apple menu.
If it is not, it may be avail-
able from www.apple.com/
swupdates.
•
Click Devices and Volumes
to view the SCSI device
addresses.
•
Look at the SCSI
address switch on each
SCSI device connected
to your system. If nec-
essary, see the instruc-
tions provided with the
devices.
Power switch?
(off=0)
SCSI address switch
Do not use 7, 8 or 9?
(not valid addresses)
DMC_ENG.fm Page 6 Thursday, May 20, 1999 3:06 PM
