Polaroid DCM 2 Online Online User'S Manual Download Page 122

Page: 122 / 153

Next

121

FCC Notice (continued)

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Note:

If your camera SCSI cable has a ferrite core on one end, that end must be con-

nected to the camera.

FCC Caution:

To assure continued compliance, any changes or modifications not

expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Product: The Polaroid DMC 2 Microscope Camera
Marketed by: Polaroid Corporation, Cambridge, MA 02139 U.S.A. Telephone: 1-800-

432-5355

Summary of Contents for DCM 2 Online


























































































































































Search results

Summary of Contents for DCM 2 Online

Reviews:

Related manuals for DCM 2 Online

Brands by name

Popular brands

Polaroid DCM 2 Online, Online User'S Manual

Search results

Summary of Contents for DCM 2 Online

Reviews:

Related manuals for DCM 2 Online

Brands by name

Popular brands