Polaris Victory Deluxe Cruiser 2001 Manual Download Page 9

Page: 9 / 107

SAFETY INFORMATION

Understand and follow the safety measures listed in this sec-

tion. Failure to do so can result in serious injury or death.

Please read this manual carefully and completely before oper-

ating this motorcycle.

Do not attempt to operate this motorcycle until you have famil-

iarized yourself with the controls and operating features.

Do not attempt to operate this motorcycle until you have been

trained in safe and proper riding techniques.

Pre-ride inspections, following the recommended maintenance

intervals, along with proper riding skills, can ensure that you will

safely enjoy the capabilities and the reliability of this motorcycle.

The engine and exhaust become very hot during operation and

stay hot for a long period of time after operation. Never touch

any part of the engine or exhaust during or after operation. Al-

ways wear clothing that covers your legs, ankles, and feet.

Call the Motorcycle Safety Foundation toll-free, 1-800-446-9227,

to find out if a rider education course is being offered in your area.

The safe use and operation of motorcycles is dependent on

proper riding techniques. Every operator needs to know the

following items before riding any motorcycle.

Complete a motorcycle training course.*

Observe all WARNINGS, CAUTIONS, and NOTES in this

manual.

Obtain professional and qualified training to learn safe and

proper riding techniques.

Obtain professional technical service for maintenance items

found in the owner’s manual and as mechanical conditions

warrant.

ProCarManuals.com

Summary of Contents for Victory Deluxe Cruiser 2001












































































































Search results

Summary of Contents for Victory Deluxe Cruiser 2001

Reviews:

Related manuals for Victory Deluxe Cruiser 2001

Brands by name

Popular brands

Polaris Victory Deluxe Cruiser 2001, Manual

Search results

Summary of Contents for Victory Deluxe Cruiser 2001

Reviews:

Related manuals for Victory Deluxe Cruiser 2001

Brands by name

Popular brands