Polaris Victory Deluxe Cruiser 2001 Manual Download Page 103

Page: 103 / 107

VICTORY MOTORCYCLE WARRANTY POLICY

WARRANTY COVERAGE AND EXCLUSIONS:
LIMITATIONS OF WARRANTIES AND REMEDIES

The warranty excludes any failures that are not caused by a defect

in material or workmanship. This warranty does not cover acciden-

tal damage, normal wear and tear, abuse or improper handling.

This warranty also does not cover any Victory Motorcycle that has

been altered structurally, modified, neglected, improperly main-

tained, used for racing, or used for purposes other than for which

it was manufactured, or for any damages which occur during trailer

transit or as a result of unauthorized service or the use of unautho-

rized parts. In addition, this warranty does not cover physical dam-

age to paint or finish, stress cracks, tearing or puncturing of uphol-

stery material, corrosion, or defects in parts, components or

Victory Motorcycle due to fire, explosions or any other cause be-

yond Victory Motorcycle Division, Polaris Sales Inc. control.
This warranty does not cover the use of unauthorized lubricants,

chemicals, or fuels that are not compatible with the Victory Motor-

cycle.
The exclusive remedy for breach of this warranty shall be, at Victo-

ry Motorcycle Division, Polaris Sales Inc. exclusive option, repair

or replacement of any defective materials, or components or prod-

ucts. THE REMEDIES SET FORTH IN THIS WARRANTY ARE

THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR

BREACH OF THIS WARRANTY. VICTORY MOTORCYCLES DI-

VISION OF POLARIS SALES INC. SHALL HAVE NO LIABILITY

TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARIS-

ING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTH-

ER CONTRACT, NEGLIGENCE, OR OTHER TORT OR OTHER-

WISE. Some states do not permit the exclusion or limitation of

incidental or consequential damages or implied warranties, so the

above limitations or exclusions may not apply to you if inconsistent

with controlling state law.

ProCarManuals.com

Summary of Contents for Victory Deluxe Cruiser 2001












































































































Search results

Summary of Contents for Victory Deluxe Cruiser 2001

Reviews:

Related manuals for Victory Deluxe Cruiser 2001

Brands by name

Popular brands

Polaris Victory Deluxe Cruiser 2001, Manual

Search results

Summary of Contents for Victory Deluxe Cruiser 2001

Reviews:

Related manuals for Victory Deluxe Cruiser 2001

Brands by name

Popular brands