Polaris UTV Series 10 2x4, Owner'S Manual

Page: 61 / 105

59
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Item Lube Method Frequency*
Engine Oil Polaris Pre-
mium 4 Syn-
thetic 0W40
Add to proper level on dip-
stick. See page 64.
Check level
daily.
Brake Fluid DOT 3 Only Maintain level between fill
lines. See page 81.
As required;
change every
200 hours
Transmis-
sion Oil
Polaris Pre-
mium Syn-
thetic chain
case lube
Maintain level at the bottom
of the fill plug threads. See
page 65.
Change at 100
hours
1. Front Gear-
case Oil
Premium
Hub Lube
Fill to bottom thread of filler
hole. Make certain machine
is on level surface.
Change annu-
ally
2. Prop Shaft
U-joints
Grease
+
Locate Fittings and Grease 50 hours
Front Prop-
shaft Yoke
Grease
+
Locate fittings and grease (3
pumps maximum)
50 hours
Front Drive
Axle (U
Joint)
Grease
+
Locate grease fitting and
grease with grease gun.
50 hours
Ball Joint Grease** Locate fitting on back side of
struts and grease with grease
gun.
50 hours
3. Swing Arm
Bushings
Grease** Locate fittings on swing arm
and grease with grease gun.
25 hours
Rear angle
drives
GL5 80-90
weight gear
lube
Fill to bottom thread of filler
hole. Make certain machine
is on a level surface.
50 hours
4. Front A
Arm Pivot
Shaft
Grease**
∆
Locate fitting on pivot shaft
and grease with grease gun.
50 hours
* More often under severe use, such as wet or dusty conditions.
**Polaris Premium all Season Grease or grease conforming to NLGI No. 2, such as
Conoco Superlube M or Mobilegrease Special.
+
Grease every 50 hours, or after submerging in water or before long periods of storage or
after pressure washing. We recommend use of Polaris Premium U-Joint Lube for maxi-
mum service of these driveline components (PN 2871515 3 oz.)(PN 2871551 14 oz.).
∆
When suspension action becomes stiff or after washing.
NOTE: Hours are based on 10 mph average.