Polaris UTV Series 10 2x4, Owner'S Manual

Page: 59 / 105

57
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Item Frequency Remarks
Tail lamp Daily Check daily; apply Polaris dielectric
grease to socket when replaced
"
L
Air Filter - Main Ele-
ment
Weekly Inspect; replace if necessary
"
Transmission Oil 25 hrs Check level; change oil annually
Battery 25 hrs Check terminals; clean; check fluid
level
J
Brake pad wear 25 hrs Inspect periodically
"
L
Engine breather filter 25 hrs Inspect, replace annually and as
needed
"
General Lubrication 25 hrs Lubricate all fittings, pivots, cables,
etc.
Engine Cylinder
Head/Cylinder Base
Fasteners
25 hrs Re-torque required at first service
only
"
Engine Oil - Level 25 hrs Check level daily; break-in service
at 25 hours.
"
L
Engine Oil - Change
(4-Cycle)
100 hrs Change oil at 100 hours, more often
in cold weather use.
"
L
Oil Filter 100 hrs Replace with oil change
L
Engine breather
hose
100 hrs Inspect
J
Carburetor Float
Bowl
50 hrs Drain bowl periodically and prior to
storage
J
Throttle Cable 50 hrs Inspect; adjust, lubricate, replace if
necessary
L
Choke (Enricher)
Cable
50 hrs Inspect; adjust, lubricate, replace if
necessary
Shift linkage 50 hrs Inspect; adjust
J
Drive belt 50 hrs Inspect; adjust, replace if necessary
"
More often under severe use, such as dirty or wet conditions
L
Emission Control System Service (California - 4-Cycle)