Polaris Universal ATV 2000 Page 117 Owner'S Safety And Maintenance Manual Download

Page: 117 / 133

109

MAINTENANCE

Wheel Removal Procedure

1.Stop the engine, place the transmission in gear and lock the parking brake.
2.Loosen the wheel nuts slightly.

3.Elevate the side of the vehicle by placing a suitable stand under the footrest

frame.

4.Remove the wheel nuts and remove the wheel.

Wheel Installation

1.With the transmission in gear and the parking brake locked, place the wheel in

the correct position on the wheel hub. Be sure the valve stem is toward the out-

side and rotation arrows on the tire point toward forward rotation.

2.Attach the wheel nuts and finger

tighten them.

3.Lower the vehicle to the ground.

4.Securely tighten the wheel nuts ac-

cording to the chart found on

page 89:

CAUTION:

If wheels are improperly

installed it could affect vehicle han-

dling and tire wear.

Summary of Contents for Universal ATV 2000






































































































































Search results

Summary of Contents for Universal ATV 2000

Reviews:

Related manuals for Universal ATV 2000

Brands by name

Popular brands

Polaris Universal ATV 2000, Owner'S Safety And Maintenance Manual

Search results

Summary of Contents for Universal ATV 2000

Reviews:

Related manuals for Universal ATV 2000

Brands by name

Popular brands