Polaris Trail Blazer 9921773 Owner'S Manual Download Page 85

Page: 85 / 122

MAINTENANCE

Lights

Taillight/Brakelight

Lamp Replacement

1. Remove the taillight lens cover

mounting screws. Remove the

lens cover and gasket and set

aside for reassembly.

2. Remove the lamp.
3. Apply dielectric grease to the

socket and install the new lamp.

4. Test the taillight/brake light for

proper operation.

5. Reinstall the gasket and lens cover.

Indicator Lamp Replacement

1. Remove the instrument panel, if necessary, to access the back of the

indicator panel.

2. Using a small, straight-blade screwdriver, turn the base of the bulb

1/4 turn counterclockwise.

3. Using a needle-nose pliers or similar tool, pull the lamp out of the

indicator panel housing.

4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reinstall the instrument panel if removed.

Lamp

Summary of Contents for Trail Blazer 9921773



























































































































Search results

Summary of Contents for Trail Blazer 9921773

Reviews:

Related manuals for Trail Blazer 9921773

Brands by name

Popular brands

Polaris Trail Blazer 9921773, Owner'S Manual

Search results

Summary of Contents for Trail Blazer 9921773

Reviews:

Related manuals for Trail Blazer 9921773

Brands by name

Popular brands