Polaris Trail Blazer 9921773 Owner'S Manual Download Page 104

Page: 104 / 122

101

MAINTENANCE

Cleaning and Storage

Storage Tips

Inspect and Lubricate

Inspect all cables and lubricate all areas of the vehicle as recommended

in the Periodic Maintenance Chart beginning on page 59.

Battery Storage

See pages 93-94 for storage and charging procedures.

Storage Area/Covers

Set the tire pressure and safely support the ATV with the tires slightly

off the ground. Be sure the storage area is well ventilated. Cover the

vehicle with a genuine Polaris cover. Do not use plastic or coated mate-

rials. They do not allow enough ventilation to prevent condensation, and

may promote corrosion and oxidation.

Summary of Contents for Trail Blazer 9921773



























































































































Search results

Summary of Contents for Trail Blazer 9921773

Reviews:

Related manuals for Trail Blazer 9921773

Brands by name

Popular brands

Polaris Trail Blazer 9921773, Owner'S Manual

Search results

Summary of Contents for Trail Blazer 9921773

Reviews:

Related manuals for Trail Blazer 9921773

Brands by name

Popular brands