Polaris Trail Blazer 2004 Owner'S Manual Download

Page: 96 / 122

MAINTENANCE AND LUBRICATION

Lights

Taillight/Brakelight Lamp Replacement

If the taillight/brakelight does not work the lamp may need to be

replaced.

1. Remove the taillight lens cover

mounting screws. Remove the

lens cover and gasket and set

aside for reassembly.

2. Remove the lamp (1) and

replace it with a new lamp.

3. Test the taillight/brakelight to

see that it’s working.

4. Reinstall the gasket and lens cover.

Indicator Lamp Replacement

1. Remove the instrument panel, if necessary, to access the back of

the indicator panel.

2. Using a small, straight-blade screwdriver, turn the base of the bulb

1/4 turn counterclockwise.

3. Using a needle-nose plier or similar tool, pull the lamp out of the

indicator panel housing.

4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reassemble the pod or front cover.

Summary of Contents for Trail Blazer 2004



























































































































Search results

Summary of Contents for Trail Blazer 2004

Reviews:

Related manuals for Trail Blazer 2004

Brands by name

Popular brands

Polaris Trail Blazer 2004, Owner'S Manual

Search results

Summary of Contents for Trail Blazer 2004

Reviews:

Related manuals for Trail Blazer 2004

Brands by name

Popular brands