1300 555 514 4
Installation Notes
Whilst most of this unit is classified as plug and play, it does not necessarily mean it is going to be a
breeze. Some things may have to be modified or you may have to tap into wires
depending on your vehicle.
The wiring and installation of this unit requires special technical skill and experience. If you do not
feel confident installing this product or do not have the level of skill necessary, please
contact Polaris on 1300 555 514 so we can refer to a recommended installer.
The ToyotaLUXX has transportation screws in the top of the unit—
please remove these
before installation
Unfortunately we do not have the colour codes of every vehicle. To find the correct wires to tap in-
to, our installers use the following items:
-
Test lamp (to find power).
-
Multimeter (to find steering wheel control wires).
-
9 volt battery (to find the speaker wires).
This unit is designed to be used in a vehicle with a 12 volt battery and a negative grounding. Before
installing this unit to a recreational vehicle, bus, or truck, make sure the battery
voltage is appropriate for this unit to be used. If installing into a 24Volt vehicle , you will need a 10
amp converter which can be purchased through automotive electronic shops such as Jaycar
electronics.
To avoid short circuit in the electrical system, ensure that the negative battery cable is
disconnected before installation.
To avoid possibility of shorting out the electrical circuit in the unit, never connect the battery wire
directly to the vehicle battery.
Always secure all wirings with cable clamps or adhesive tape to prevent short circuit.
Please make sure all wiring connections and speaker wires are well insulated.
When pulling the dash apart, please use quality trim tools to avoid damaging your dash.
Please do NOT cut any plugs off of any Polaris cameras. Doing so will void your warranty! If you
need to blend other brand cameras into our system, please call Polaris on 1300 555 514 so we can
refer you to a recommended dealer who has the skill and experience in performing this type of
work.
Some vehicles will require extra parts such as:
-
Fascia's to make it fit nice and neatly.
-
CAN bus modules to retain steering wheel controls or other original features of the car.
-
modules to retain a factory amp.
If there is something you are not 100% sure about when installing this unit, please give our
experienced technicians a call on 1300 555 514.
